In RoomRenovation’s 2026 planning model the same mid-range kitchen is about $33,300 in San Antonio and $49,000 in New York, a 47% spread that comes only from the city factor (0.95 to 1.40). Scope and finishes usually matter more than the city.

The mid-range planning point in 15 metros

Each row is the middle point of the model for one room. Click a city to open the full cosmetic-to-premium range for that room.

CityFactorKitchenBathroomLiving room
New York1.40$49,000$25,200$21,000
Los Angeles1.28$44,800$23,000$19,200
Seattle1.25$43,800$22,500$18,800
Boston1.25$43,800$22,500$18,800
Chicago1.18$41,300$21,200$17,700
Denver1.15$40,300$20,700$17,300
Philadelphia1.10$38,500$19,800$16,500
San Diego1.10$38,500$19,800$16,500
Miami1.10$38,500$19,800$16,500
Austin1.08$37,800$19,400$16,200
Atlanta1.05$36,800$18,900$15,800
Dallas1.02$35,700$18,400$15,300
Houston1.00$35,000$18,000$15,000
Phoenix1.00$35,000$18,000$15,000
San Antonio0.95$33,300$17,100$14,300

How the numbers are built

Room baseline in US dollars × city factor, rounded to the nearest $100. The unadjusted mid-range baselines are $35,000 for a kitchen, $18,000 for a bathroom and $15,000 for a living room. The factor is a relative planning bracket for local labour and market conditions, not an hourly rate.

The figures use RoomRenovation's published planning model: a room baseline in US dollars multiplied by a broad city factor and rounded to the nearest $100 (see the cost methodology). It is an educational estimate, not a contractor quote and not a survey of invoices. Dimensions, hidden damage, access, permits, taxes, design fees and the products you pick can move a real quote well outside the band.

What a city factor can and cannot tell you

  • It ranks markets: New York, Los Angeles, Seattle and Boston sit at 1.25 to 1.40; Houston and Phoenix at 1.00; San Antonio below it.
  • It does not capture your building. A 1950s house with knob-and-tube wiring in a cheap market can cost more than a clean 2015 condo in an expensive one.
  • It does not change what you buy. Switching from custom cabinets to stock cabinets moves a kitchen budget far more than moving cities.
  • It does not include design fees, permits, taxes or temporary housing, which you should keep as separate lines.

Three ways to use the comparison

  1. Sanity-check a quote. If a bid sits far outside the band for your city, ask which scope items differ from the model: moved plumbing, new circuits, structural work.
  2. Choose the scope first. Decide between cosmetic, mid-range and premium before comparing cities; the three points differ by roughly 2.3 to 3 times each.
  3. Build the room before you ask for prices. A measured 3D model gives each bidder the same wall and floor quantities, so totals become comparable.

Keep planning

Frequently asked questions

Which US city is cheapest to renovate in?

In the 2026 planning model, San Antonio has the lowest factor (0.95) among the 15 metros shown, followed by Houston and Phoenix at 1.00. New York has the highest at 1.40. A factor is a broad market bracket, not a quote.

How much more does New York cost than Houston?

The model puts New York 40% above the Houston baseline: a mid-range kitchen at $49,000 versus $35,000. Your building, access and scope can change that gap in either direction.

Are these prices from real projects?

No. They are modeled planning ranges with the formula disclosed. Use them to compare scopes and then replace them with measured, itemized local quotes.

Does the model include permits and design fees?

No. Keep permits, taxes, professional design and temporary housing as separate lines in your own budget.

Plan this room in 3D

Planning ranges for comparison only. Confirm scope, permits and prices with licensed local professionals.