# Standard Bathroom Sizes and Layouts: 5×8, Half, Primary

> Standard bathroom dimensions and layouts: 5 by 8 ft full bath, 3 by 6 ft half bath, 8 by 10 ft primary bath, with fixture spacing and clearance numbers.

Last updated: 2026-11-14

Standard bathroom dimensions and layouts: 5 by 8 ft full bath, 3 by 6 ft half bath, 8 by 10 ft primary bath, with fixture spacing and clearance numbers.

RoomRenovation

Updated November 2026

3 min read

*Fixture clearances set a bathroom’s minimum size.*

**In this guide**

Open the studio →

**The most common US full bathroom is about 5 by 8 feet (40 sq ft) with a toilet, vanity and tub or shower; a half bath fits in roughly 3 by 6 feet, and a comfortable primary bath starts around 8 by 10 feet.**

## Common sizes at a glance

| Type | Typical size | Area | Fits |
|---|---|---|---|
| Half bath (powder room) | 3 ft × 6 ft | 18 sq ft | Toilet and sink |
| Full bath | 5 ft × 8 ft | 40 sq ft | Toilet, vanity, tub or shower |
| Larger full bath | 6 ft × 9 ft | 54 sq ft | Wider vanity, separate shower storage |
| Primary bath | 8 ft × 10 ft | 80 sq ft | Double vanity, shower and tub |
| Wet room | 6 ft × 8 ft or larger | 48 sq ft+ | Open shower with floor drain |

## Fixture spacing numbers

- Toilet: 15 inches from centerline to a side wall or tub, 21 inches clear in front; a 30-inch-wide space is common.
- Vanity: 30 inches wide minimum in practice; 36 to 48 inches is more comfortable; allow 21 inches clear in front.
- Shower: 30 by 30 inches inside is a common minimum, 36 by 36 inches is more comfortable, and 60 by 30 inches is a common alcove size.
- Tub: a standard alcove tub is 60 inches long and about 30 to 32 inches wide.
- Door: 30 to 32 inches is the practical width for a bathroom door; check your local code for the minimum.

## Three layouts for a 5×8 bath

| Layout | How it works | Trade-off |
|---|---|---|
| Tub along the short wall | Vanity and toilet on the long wall | Classic and economical; reuses stacks |
| Walk-in shower at the end | 36-inch shower replaces the tub | Feels larger; needs waterproofing |
| Corner shower | 36 by 36 inch shower, vanity and toilet sharing a wall | Saves floor area; smaller shower |

## Check your own room in 3D

Enter the exact width, depth and ceiling height, place the toilet, vanity and shower or tub, and test the door swing both ways. The planner shows the wall area to be tiled and the floor area, which you can use for tile quantities and waste.

## Keep planning

- [How to plan a bathroom remodel](https://roomrenovation.ai/blog/how-to-plan-a-bathroom-remodel/)
- [Bathroom remodel cost by US city](https://roomrenovation.ai/blog/bathroom-remodel-cost-by-us-city-2026/)
- [Small room layout rules](https://roomrenovation.ai/blog/small-room-layout-rules-that-matter/)

## Frequently asked questions

### What is the smallest legal bathroom size?

Rules vary by jurisdiction. Many US codes focus on fixture clearances (such as 15 inches from a toilet’s center to a wall and 21 inches in front) rather than a minimum floor area.

### How big is a standard bathroom?

About 5 by 8 feet is the most common full bath, around 40 square feet.

### How much space does a double vanity need?

Roughly 60 inches wide, with each basin centered in its own 30 inches.

### How big should a walk-in shower be?

At least 30 by 30 inches inside; 36 by 36 inches is more comfortable, and 60 by 30 inches is a common alcove size.

[Plan this room in 3D](https://roomrenovation.ai/studio/?from=/blog/standard-bathroom-sizes-and-layouts/)

Planning guidelines, not code advice. Confirm requirements with your local building department.

---
Source: https://roomrenovation.ai/blog/standard-bathroom-sizes-and-layouts/
